Guide for Linksys extender setup | extender.linksys.com

 

Linksys range extender is used to repeat the wireless signals from your router to expand its coverage area. This device allows you to access the Wi-Fi from an access point or extend the wireless network using a wireless or wired connection. In this guide, you will learn how to install the Linksys extender via extender.linksys.com. Setting up this device is a quick and easy process. All you need to go step-by-step to complete the setup properly.

Here is how to install the extender via extender.linksys.com

·  First of all, connect your extender to a power source and press the power button to turn on the device.

·  Now, take an Ethernet cable and connect it from your extender to your computer’s LAN port. Check the Ethernet LED light on the extender to confirm the connection.

·  Visit the extender.linksys.com page in your browser. Type the default gateway in the address bar of the browser and press the enter key.

·  It will be redirected you to the web-interface of the extender.

·  Now, click on the Wireless Settings and select the Basic Wireless settings. Here you can change the wireless password of your extender.

·  Next, select the option Wireless Security to configure security settings.

·  Choose a strong encryption key and wireless security standards such as WPA2-PSK.

·  Once done, save the settings and then a page will appear where you will see Setup Finished.

Can’t Access extender.linksys.com Page

Here are easy tips to troubleshoot this issue:

 

Step 1: Check the Connections between the computer and your Linksys extender

1.      Make sure that your computer device is connected to your extender’s network either wirelessly or via an Ethernet cable. Check if the Ethernet cable is properly connected from the computer to your extender.

2.      If you’re using the wireless connection then click on the Wireless Utility on the PC and check the SSID to which your computer is connected to.

3.      If you are not connected to the Linksys extender’s SSID then choose the SSID name of your extender and enter the wireless password to connect to it.

4.      To check the connectivity between the computer and the extender, you can perform the ping test.

5.      For this, you need to obtain the IP address of the Linksys device. The default IP of the Linksys range extender is 192.168.1.1.

Step 2: Check the LEDs on the Extender

You can check the status of your extender with the help of the LED indicators. You can refer to the manual guide of your device to confirm if all the LEDs are working properly.

Step 3: Power cycle the Extender

For this, unplug the power cables and then plug them back into a power source. And, check the status of the power LED on the extender.

Step 4: Reset the Linksys Extender   

Locate the reset button on the extender to reset it to the factory defaults. When you perform the factory reset, all the settings are restored to the factory defaults. To start the process, press and hold the reset button with a paper clip for at least 10-20 seconds. Hold this button until the LED on the extender starts blinking. Once done, release the button and try to perform the Linksys wifi extender setup process.

Conclusion:

This was all about how to complete the Linksys extender setup process. We hope that this article helped you. If you need further assistance related to the Linksys extender then you can contact our technical team. We have a team of experts who will resolve your queries and fix any issues. You can contact them through our toll-free free number or chat online via a live chat window.

Visit us at: https://extenderlink-sys.com/